What should be paid attention to in the knotting process of wear-resistant ramming material

The knotting process of wear-resistant ramming material is a very important process, so what is needed in this process?

1. The basic is of course the standard operation process, but in addition, there are many precautions in the knotting process of the wear-resistant ramming material. For example, ensure the power supply and water supply before knotting The improvement of the system should also be prepared in advance by the staff on each project. Of course, it also includes that the staff are not allowed to carry any combustibles on the work site, of course, including mobile phones, keys and other items.

2. Sand adding in the process of wear-resistant ramming material is a relatively strict process. For example, sand must be added at one time, and should not be added in batches. Of course, when adding sand, ensure that the sand is spread on the bottom of the furnace. Do not pile up in a pile, otherwise it will cause the particle size of the sand to separate.

3. When tying the knot, I have to operate it according to the method of shaking first and then vibrating. And pay attention to the method to ensure that the operation process should be light first and then heavy. And the joystick should be inserted to the bottom at one time, and every time When inserting the rod, shake it 8 to 10 times.

4. After the bottom of the furnace is knotted, it is necessary to ensure that it can be put into the dry pot stably. This ensures that the forming is relatively standard, generally a standard annular 3-corner ring. Of course, during the whole knotting process, it is necessary to There are many steps to pay attention to, and each step cannot be ignored.

The above points are the points to pay attention to in the knotting process of wear-resistant ramming materials. Luoyang Quantong Kiln Industry Co., Ltd. is a comprehensive high-tech company integrating R&D, production, sales and construction services. Large and medium-sized circulating fluidized bed boilers in the industry, the main materials are: high-strength wear-resistant refractory castables, wear-resistant corundum plastics, self-flow wear-resistant corundum castables, medium-heavy and slightly expanded plastics, lightweight thermal insulation concrete, high performance High-alumina castables, high-temperature binders, high-temperature cement and plastering materials, various ramming materials, high-strength wear-resistant corundum bricks, ladle breathable bricks, silicon carbide bricks, intermediate frequency furnace linings, special-shaped wear-resistant refractory bricks, thermal insulation bricks, etc. 20 There are more than 160 kinds of unshaped products and shaped products in this series. We sincerely welcome your inquiries.