The application of intermediate frequency furnace ramming material in stainless steel furnace

The application of intermediate frequency furnace ramming materials in master alloys Recently, there are more and more manufacturers smelting intermediate frequency furnace intermediate alloys, and the requirements for intermediate frequency furnace ramming materials are getting higher and higher. It requires impermeability, refractoriness, corrosion resistance, etc. It is much higher than the previous requirements, and it is also hoped that the cost can be reduced. According to the market demand and needs, Gongyi Beiguanzhuang Hengtong High Temperature Furnace Material Factory has been successfully developed locally after continuous exploration and experimentation. The master alloys on the market are generally dominated by aluminum silicon, aluminum copper, aluminum iron, aluminum titanium boron, etc. The smelting temperature is generally not high. The temperature of iron smelting is high, but it is higher than that of general aluminum smelting. Due to the extremely strong permeability of aluminum, it can be drilled as soon as it sees the seam, and the activity of aluminum is extremely high, so it is easy to produce displacement reactions, so many general furnace lining materials are produced. It won't work after a few furnaces. Therefore, it is common to use graphite crucibles with intermediate frequency furnace ramming materials on the market. However, the disadvantage of ordinary intermediate frequency furnace ramming materials is that once the graphite crucible is broken, the furnace lining must be removed, otherwise it is easy to wear And our newly developed intermediate frequency furnace ramming material can not only be used alone but also can be used together with graphite crucible. When used together, even if the crucible is accidentally cracked when the raw material is loaded, it will not affect the use. It can be used all the time, and there is no need to worry about the furnace lining passing through the furnace, which will not affect the normal work. In addition, the cost is not high. Since its launch, it has quickly gained a large number of intermediate alloy customers through word-of-mouth publicity from customers.