Intermediate frequency furnace charge manufacturers: how to protect the intermediate frequency furnace lining

The intermediate frequency furnace is a necessary training equipment in the training industry. The intermediate frequency furnace requires fuel, and the intermediate frequency furnace charge is the primary fuel for the intermediate frequency furnace exercise. The intermediate frequency furnace requires maintenance of the furnace lining. The intermediate frequency furnace charge manufacturers will introduce to you. How to maintain the lining of the intermediate frequency furnace.

Intermediate frequency charge manufacturer

The method of lining the intermediate frequency furnace:

1. If the furnace capacity of the intermediate frequency furnace is too large, it will increase the cost. If it is too small, it will easily cause splashing. Therefore, if it is too large or too small, the service life of the intermediate frequency furnace lining will be reduced. Compared with the optimal furnace capacity ratio at the time of design.

2. The loading amount of the converter should be reasonable. The intermediate frequency charge manufacturer believes that in addition to the appropriate furnace capacity ratio, the appropriate depth of the molten pool should also be ensured (it is necessary to exceed the larger penetration depth of the oxygen flow to the molten pool).

3. The intermediate frequency charge manufacturer recommends that the enterprise confirm a scientific and reasonable oxygen supply system to ensure the speed of impurity removal, slag formation, removal of gas and inclusions in the steel, and reasonable control of the final carbon and temperature.

4. The intermediate frequency charge manufacturer recommends that under the premise of good molten steel casting effect, the lower the temperature control and final temperature of the steelmaking process, the better.

5. The intermediate frequency charge manufacturer believes that the service life of the intermediate frequency furnace lining is affected by the quality of the raw materials used in converter steelmaking, such as molten iron, scrap steel, slag materials, intermediate frequency charge, slag adjusting agent and flux, etc., so the quality of raw materials should be ensured first.

The above are the methods and precautions for maintaining the furnace lining during the use of the intermediate frequency furnace introduced by the intermediate frequency furnace charge manufacturer. For more information, please click to view our website for details.