Do you know that it is very important to beat the ramming material of the intermediate frequency furnace?

Many companies will use different ramming materials when they beat the furnace, and the effect of different ramming materials is different. So it is very important to use the intermediate frequency furnace ramming material to beat the furnace, then when the furnace is beaten, the intermediate frequency furnace ramming material How important is it? Next, please tell us about it.

When the furnace is fired, the material is 10 cm thick, and then beat 6 times counterclockwise and 6 times clockwise, basically it takes half an hour to finish. Follow the method for another half an hour. If you want to build a one-meter-high furnace, the furnace time should be more than 5 hours. In this way, the furnace will be very smooth, and the use time of the furnace will be longer.

Through the introduction of all the kiln manufacturers in the kiln industry, I believe everyone will know the importance of the furnace.

There are many materials for making industrial furnaces, such as all-through kilns, etc. So what materials should be used for the intermediate frequency furnace crucible? Magnesium chloride can be used as an alkaline crucible, silicon oxide can be used as an acid crucible, and alumina can be used as a neutral crucible. So what are the requirements for the material of the crucible? Let's take a look.

1. High refractoriness is required.

2. The physical and chemical properties should be stable and resistant to corrosion.

3. Good thermal shock resistance.

4. Has insulation function.

5. The thermal conductivity is small.

6. No pollution, low cost.

Through the above introduction, I believe that everyone has a clear understanding of the requirements and characteristics of the crucible. If you want to know more, please contact the Quantong Kiln Industry Punching Factory!