Introduction of construction technology of full fiber furnace lining in furnace lining material

Today, Luoyang Quantong Kiln Industry Co., Ltd. will take you to understand the construction process of full fiber lining in furnace lining:

1. The fiber module, fiber material and anchor rod must meet the requirements of the design documents, and the drawings or materials must not be modified arbitrarily, and the materials must be kept dry.

2. Weld the anchor rod according to the position required in the drawing, the anchor rod and the furnace shell should be welded firmly, and the welding rod should be made of stainless steel electrode, and the welding rod grade (Ao 302).

3. The 2 layers of fiber blankets should be stacked in place.

4. Install the fiber module according to the requirements of the furnace lining diagram, (remove the plastic cloth on the outer package of the fiber module) first install it from the furnace top furnace mouth module, then install the furnace top module, and then install the two side wall furnace mouth modules and side wall modules. Finally, install the rear wall module. The fiber module is tightened with a nut, and a certain layer of compensation blanket cotton is designed to be added to the compensation blanket cotton.

5. After all fiber modules are installed, cut and remove the packing tape plywood and plastic pipe (if the corners are stacked, the packing tape plywood and plastic pipe should be removed first), insert loose cotton into the cavity left by the plastic pipe, and then use a special clapper to cover the wall. Tap and level. If it is required to spray refractory paint on the inner surface of the fiber lining, it should be sprayed evenly without leakage.

Luoyang Quantong Kiln Industry Co., Ltd. is a comprehensive high-tech company integrating R&D, production, sales and construction services. It is a high-tech enterprise in Henan Province and an IS09001 quality assurance system certification enterprise. We sincerely welcome your inquiries.