Furnace lining manufacturers tell you the advantages of pneumatic furnace builders get

today,Furnace liningThe manufacturer Luoyang Quantong Kiln Industry Co., Ltd. tells you where the advantages of the pneumatic furnace building machine are:

The pneumatic furnace building machine is composed of a gas distributor, a cylinder liner, a gas hammer, a length adjusting rod and a chain. It is mainly used for knotting the dry lining material of the intermediate frequency furnace. The pneumatic furnace building machine uses the gas hammer to hit the intermediate frequency furnace crucible. According to the principle of the inner wall, the large and small particles of the furnace lining material fill the gaps with each other to achieve the tight effect of the furnace lining material. The furnace building machine is designed with an automatic rotating device, which can be automatically rotated during use, and the input gas volume can be adjusted at will to adjust the vibration. The size of the force ensures that the knotting effect is even.

Advantages:

\u003Ci>A．\u003C\/i> \u003Cb>A.\u003C\/b>\u003Ci>气动筑炉机可以减少人力,缩短作业时间.\u003C\/i> \u003Cb>Pneumatic furnace building machine can reduce manpower and shorten working time.\u003C\/b>

Use the pneumatic furnace beater produced by Weifang Tiancheng Foundry Materials Co., Ltd. to tie the furnace lining. One to two people can operate it. After the mixture is put into the furnace and the induction coil at one time, the driving is controlled to drive the pneumatic vibrator to move from bottom to top. It can reduce manpower and greatly shorten the operation time (10T intermediate frequency melting furnace knotting, it only takes 1 hour to complete).

\u003Ci>B．\u003C\/i> \u003Cb>b.\u003C\/b>\u003Ci>气动筑炉机是打结坩埚内壁,使打结捣打效果均匀,细致.\u003C\/i> \u003Cb>Pneumatic furnace building machine is to knot the inner wall of the crucible, so that the knotting and ramming effect is uniform and meticulous.\u003C\/b>

After the pneumatic beater can put the mixture into the furnace at one time, the pneumatic beater rotates upwards from the lower part of the wall, so that the mixed material is very uniformly knotted, and it is not easy to cause the deflection of the furnace, and the thickness of the knotted furnace wall is uniform.

\u003Ci>C．\u003C\/i> \u003Cb>c.\u003C\/b>\u003Ci>一次性打结,气动筑炉机在打炉时没有异物混入.\u003C\/i> \u003Cb>One-time knotting, no foreign matter is mixed with the pneumatic furnace building machine when it is furnaced.\u003C\/b>

Because the mixture is put into the furnace at one time, the pneumatic vibrator can seal the feeding place when it is knotted inside, so there will be no foreign matter mixed in.

\u003Ci>D．\u003C\/i> \u003Cb>D.\u003C\/b>\u003Ci>气动筑炉机厂家分享气动筑炉机打结的烧结层厚度均匀,可维持粉末层,形成安全作业\u003C\/i>\u003Cb>Pneumatic furnace building machine manufacturers share the uniform thickness of the sintered layer knotted by the pneumatic furnace building machine, which can maintain the powder layer and form a safe operation\u003C\/b>

The mixture vibrated by the pneumatic furnace building machine is uniform and meticulous, and the furnace is not easy to deflect during vibration. There is no foreign matter mixed in the mixture, which can reduce the local erosion caused by the mixing of barter, and can maintain the thickness of the sintered layer. It can maintain the powder layer and block the occurrence of accidents caused by local erosion of molten water in the work (that is, to prevent leakage of the furnace).

\u003Ci>E．\u003C\/i> \u003Cb>E.\u003C\/b>\u003Ci>气动筑炉机打结采用内打结方式,不会有粉尘等污染.\u003C\/i> \u003Cb>The knotting of the pneumatic furnace building machine adopts the inner knotting method, and there will be no pollution such as dust.\u003C\/b>

\u003Ci>F．\u003C\/i> \u003Cb>F.\u003C\/b>\u003Ci>气动振动器在打结炉衬时自旋转,振动力始终保持在1800N,使炉衬打结均匀坚固.\u003C\/i> \u003Cb>The pneumatic vibrator self-rotates when the lining is knotted, and the vibration force is always kept at 1800N, so that the lining is evenly knotted and firm.\u003C\/b>

\u003Ci>G．\u003C\/i> \u003Cb>g.\u003C\/b>\u003Ci>传统的打炉方法需要消耗很多的人力和时间,所以无法适应现在的生产需要.而用自转式气动打炉机就可以解决并降低生产成.,\u003C\/i> \u003Cb>The traditional method of blasting furnaces consumes a lot of manpower and time, so it cannot meet the current production needs. The rotary pneumatic blasting machine can solve and reduce the production cost.\u003C\/b>

The above are the advantages of the pneumatic furnace building machine