Basic introduction to coil cement

Coil glue is a kind of material for modifying the inner and outer surface of the coreless induction switch coil. The coil glue should be uniformly modified on the inner and outer surfaces of the coil with a thickness of about 6mm. It can be used in the middle of the coil to have insulation effect. Increase about 12%-14 The percentage of water can be used to obtain the uniformity of the modification. The coil cement is used for the magnetic induction coil of the high-frequency coreless intermediate frequency induction electric furnace. The coils formed by melting and water seepage are ignited, and it is also reasonable to prevent the penetration of the furnace caused by the high temperature of the molten steel. It is suggested that small corrections should be carried out 8 hours outside the furnace to facilitate drying. Large corrections or alterations to the new coil should be 1 before the furnace is built. The day unfolds.

Advantages of Coil Clay:

1. Insulation effect between coil turns.

2. Coil glue can be used to modify new coils or as a correction material for coils.

3. High thermal conductivity index.

4. The coil cement can prevent the occurrence and expansion of the furnace to the greatest extent.

characteristic:

Coil cement has the characteristics of high toughness, high density, high insulation, etc. It is a steel jade cement specially designed to protect the coreless intermediate frequency induction furnace coil. The coil cement has a very good viscosity and is relatively fast to modify. Online modification The bright surface on the coil can buffer the swelling and shrinking of the lining during work. In addition, the coil mud can reasonably prevent the leakage of the molten metal material, and protect the coil from the penetration of the molten metal material.

The above is the relevant knowledge about coil cement that Xiaobian brings to you today. If you have any needs, you can contact us directly.