What are the characteristics and advantages of coil cement?

Coil cement should be applied evenly on the inside and outside of the coil with a thickness of about 6mm. It can be used for insulation between the coils. Add about 12%-14% of water to achieve uniformity of the application.

The coil cement is suitable for the induction coil of the intermediate frequency coreless induction furnace. It is evenly modified on its surface and the ramp, which has a good insulation effect, effectively prevents the aging of the coil, and causes the coil to catch fire due to water leakage. It is recommended that small repairs should be carried out 8 hours before the furnace is built to allow air drying. Large repairs or alterations to the new coil should be carried out 1 day before the furnace is built.

Advantages of Coil Clay:

\u003Ci>1．\u003C\/i> \u003Cb>1.\u003C\/b>\u003Ci>线圈胶泥能够在线圈匝间起绝缘作用.\u003C\/i> \u003Cb>Coil glue can insulate between coil turns.\u003C\/b>

\u003Ci>2．\u003C\/i> \u003Cb>2.\u003C\/b>\u003Ci>线圈胶泥能够涂改新线圈或作线圈的修补料.\u003C\/i> \u003Cb>Coil cement can be used to modify new coils or as a repair material for coils.\u003C\/b>

\u003Ci>3．\u003C\/i> \u003Cb>3.\u003C\/b>\u003Ci>高的热导系数.\u003C\/i> \u003Cb>High thermal conductivity.\u003C\/b>

\u003Ci>4．\u003C\/i> \u003Cb>4.\u003C\/b>\u003Ci>线圈胶泥能够高限度的防止穿炉的产生和扩大.\u003C\/i> \u003Cb>The coil cement can prevent the generation and expansion of the furnace to a high degree.\u003C\/b>

Features of Coil Clay:

Coil cement has the characteristics of high strength, high density and high insulation. Coil cement is a corundum cement specially designed for the maintenance of coreless induction furnace coils. Coil cement has good viscosity and is easy to modify. Modification is formed on the coil. The smooth surface can buffer the expansion and contraction of the working lining. In addition, the coil mud can also effectively prevent the leakage of the molten metal and protect the coil from the breakdown of the molten metal.

Coil cement is added with colored materials to make the coil slurry layer and working furnace lining easy to distinguish. It should be uniformly painted on the inside and outside of the coil with a thickness of about 6-10 mm.