The intermediate frequency furnace ramming material itself is to maintain the furnace and coil

The baking and heating system of the ramming material in the intermediate frequency furnace varies according to the raw materials. The main purpose of the ramming material is to build the lining of the tempering furnace that is in direct contact with the molten material, such as the blast furnace tapping ditch, the bottom of the steelmaking furnace, and the induction furnace. In addition to forming the whole furnace lining, the inner lining, the electric furnace roof and the blanking parts of the rotary kiln can also be used to manufacture large prefabricated components. For the ramming material containing inorganic chemical binders, it can be dismantled after it hardens to an appropriate strength. For mold baking, the material containing thermoplastic carbon binder should be cooled to a suitable strength and then demolded. After demolding, it should be quickly heated to carbonize it before use. No binder material that hardens at room temperature, often in After tamping, sintering is carried out with a mold. The sintering of the ramming material of the intermediate frequency furnace can be carried out before use, or can be completed by heat treatment with a suitable thermal system during use.

There are many manufacturers of intermediate frequency furnace charging materials currently on the market, which makes many people see business opportunities and have the courage to enter it. Any steel grade is suitable. In fact, it deviates from the ramming material itself. The intermediate frequency furnace ramming material itself is the maintenance of the furnace. And the coil. In order to play a role, the head must have high refractoriness, strong corrosion resistance, corrosion resistance, and good fineness. Only by grasping the foundation can a good ramming material be produced. Any other formula is not intact If it does not move, it needs to be sensitively controlled according to the temperature of the tempered steel, the properties of the steel, and the size of the furnace. Steel-making is not the same as iron-making and copper-making. Therefore, it is necessary to treat it differently. Seek truth from facts. Only in this way can a kind of refractory be produced. Materials. The oven curves outside the collar are all different.