There are many steps in the whole process of ramming material in the intermediate frequency furnace

There are many steps in the whole process of ramming material in the intermediate frequency furnace, and knotting is some of the more important processes. And the process of knotting can also affect the service life of the furnace. The ramming material is made of silicon carbide, graphite, electric calcining Anthracite as raw material, mixed with a variety of ultrafine powder additives, fused cement or composite resin as a bulk material made of binder. It is used to fill the gap between the furnace body cooling equipment and the masonry or the filler for the leveling layer of the masonry. The ramming material has good chemical stability, erosion resistance, wear resistance, shedding resistance, thermal shock resistance, and is widely used in metallurgy, building materials, non-ferrous metal smelting, chemical industry, machinery and other manufacturing industries. Then, what should we pay attention to in the process of knotting How can we ensure that the service life of the furnace is not affected?

First of all, the more basic is of course the standardized operation process, but in addition, there are many precautions in the knotting process of the ramming material in the intermediate frequency furnace. For example, before knotting, ensure the power supply and The improvement of the water supply system should also be prepared in advance by the staff on each project. Of course, it also includes that the staff is prohibited from carrying any combustibles on the work site, of course, including mobile phones, keys and other items.

The second point is that adding sand during the ramming process of the intermediate frequency furnace is a process with strict requirements. For example, the sand must be added at one time, and should not be added in stages. Of course, when adding sand, make sure that the sand is spread on the furnace. The bottom of the sand should not be piled up in a pile, otherwise the particle size of the sand will be separated.

The third point is that when tying the knot, the production should be operated according to the method of shaking first and then vibrating. And pay attention to the method to ensure that the operation process should be light and then heavy. And the joystick should be inserted to the bottom at one time, and every time Every time you insert the rod, you need to shake it 8 to 10 times.