Wear-resistant ramming material during the knotting process

The whole process of wear-resistant ramming material has many steps, and knotting is some of the more important processes. And the process of knotting can also affect the service life of the furnace. What should we pay attention to in the process of knotting , to ensure that it does not affect the service life of the furnace? Dry ramming material

1. The basic is of course the standard operation process, but in addition, there are many precautions in the knotting process of the wear-resistant ramming material. For example, ensure the power supply and water supply before knotting The improvement of the system should also be prepared in advance by the staff on each project. Of course, it also includes that the staff are not allowed to carry any combustibles on the work site, of course, including mobile phones, keys and other items.

dry rammer

2. Sand adding in the process of wear-resistant ramming material is a relatively strict process. For example, sand must be added at one time, and should not be added in batches. Of course, when adding sand, ensure that the sand is spread on the bottom of the furnace. Do not pile up in a pile, otherwise it will cause the particle size of the sand to separate.

3. When tying the knot, I have to operate it according to the method of shaking first and then vibrating. And pay attention to the method to ensure that the operation process should be light first and then heavy. And the joystick should be inserted to the bottom at one time, and every time When inserting the rod, shake it 8 to 10 times.

4. After the bottom of the furnace is knotted, it is necessary to ensure that it can be put into the dry pot stably. This ensures that the forming is relatively standard, generally a standard annular 3-corner ring. Of course, during the whole knotting process, it is necessary to There are many steps to pay attention to, and each step cannot be ignored.