How to use intermediate frequency furnace ramming material in stainless steel furnace

The use of intermediate frequency furnace ramming materials in master alloys Recently, more and more manufacturers are smelting intermediate frequency furnace intermediate alloys, and the requirements for intermediate frequency furnace ramming materials are getting higher and higher. Impermeability, refractoriness, corrosion resistance, etc. are required. It is much higher than the previous requirements, and it is also hoped that the cost can be reduced. According to the market demand and needs, the high temperature furnace material factory has successfully developed a number of master alloys in the local area after continuous exploration and experiments. Customers, and achieved a good reputation and praise from customers. At present, the master alloys on the market are generally mainly aluminum silicon, aluminum copper, aluminum iron, aluminum titanium boron, etc.

The smelting temperature is generally not as high as that of iron smelting, but it is higher than the general aluminum smelting temperature. Due to the extremely strong permeability of aluminum, it can be drilled as soon as it sees the seam, and the activity of aluminum is extremely high, which is easy to produce displacement reaction, so the general furnace lining material , many of them can't get out of a few furnaces. Therefore, it is common to use graphite crucibles with intermediate frequency furnace ramming materials on the market. However, the disadvantage of ordinary intermediate frequency furnace ramming materials is that once the graphite crucible is broken, the furnace lining must be destroyed. , otherwise it is easy to wear through the furnace.

And our newly developed intermediate frequency furnace ramming material can not only be used alone, but also can be used together with graphite crucible. In the case of simultaneous use, even if the crucible is accidentally cracked when the raw material is loaded, it will not affect the use, and it can still be used all the time. It can be used, and there is no need to worry about the furnace lining passing through the furnace, which will not affect the normal work. In addition, the cost is not high. Since its launch, it has quickly gained a large number of intermediate alloy customers through word-of-mouth publicity from customers.