What is the difference between dry and wet mixing of intermediate frequency furnaces?

What is the difference between dry and wet mixing of intermediate frequency furnaces?

The material is acidic dry ramming material. The furnace lining is pre-mixed dry ramming material. The high-quality high-temperature binder is selected to have strong crack resistance. The high-quality and high-purity quartz sand and quartz powder have high temperature resistance. .The high temperature can reach 2000 degrees, and it is widely used in the continuous operation and intermittent operation of non-ferrous metals and ferrous metals. This material is used to melt a series of metal materials such as ordinary steel, 45 steel, high gong steel, high manganese steel, and special steel. Use The heats can reach more than 120 heats, and the maximum heat can reach 195 heats. The ZH2 type material is used for smelting gray iron, and the use heats can reach more than 300 heats, and the maximum heat can reach 550 heats.

dry mix

The above information is provided by the dry material manufacturer

The intermediate frequency furnace ramming material is divided into dry ramming material and wet ramming material according to the construction method. The two main differences are as follows:

1. During the construction of dry batter, high-frequency vibration is used to make the material flow and exhaust, so as to obtain a relatively dense furnace lining; after wet batter is mixed with water, the air gun is used to ram the exhaust to obtain a dense furnace lining.

2. The tire mold will be melted together with the scrap steel in the oven process after the dry batter construction, and the wet batter tire mold can be demolded and used repeatedly.

3. Dry blasting is generally suitable for furnaces with relatively large volumes, and wet blasting is generally suitable for small intermediate frequency furnaces.