What does coil glue do?

Coil cement is a coating material, and it is a coating material with sensors. It is easy to use and has many applications. It should be evenly coated on the inner surface of the coil with a thickness of about 6mm. It can be used for insulation between coils. Add about 12 percent -14 percent water for uniformity.

The induction coil used in the medium frequency coreless induction furnace with coil cement is evenly coated on its surface and ramp, and has a good insulation effect, which can effectively prevent the coil from catching fire caused by the aging of the coil and water leakage, and effectively prevent the molten steel temperature from being too high. Make minor repairs 8 hours before the furnace is built to allow for air drying. 1 day before the furnace is built, repair or apply a new coil. So what exactly does coil cement do? What does it do? Let's take a look.

1. After drying, it has good insulating properties and can replace mica, etc. It has the function of insulating protective layer.

2. Because the cement is between the coil and the insulating layer, if there is a small amount of water, the resistance will drop, but there will be an early warning.

3. The glue can be made into a cone, which can reduce friction, fix the coil without deformation, and prolong the service life of the coil.

4. Although the cost of coil and cement is high, the use time is the same as that of coil, and it can be restored on site, so the overall cost is reduced.

5. Cement has high fire resistance. If there is metal leakage, cement will also have a protective effect. If there is an alarm, cement can provide time to deal with the accident.

The above content is an introduction to the function of coil cement, I hope it can help everyone.