The intermediate frequency furnace ramming material itself is to maintain the furnace and coil

The baking and heating system of the ramming material in the intermediate frequency furnace varies according to the material. The main purpose of the ramming material is to build the lining of the tempering furnace that is in direct contact with the molten material, such as the blast furnace tapping groove, the bottom of the steelmaking furnace, and the induction furnace. In addition to forming the overall furnace lining, the inner lining, the electric furnace roof and the blanking parts of the rotary kiln can also be used to make large-scale prefabricated components. For the ramming material containing inorganic chemical binders, it can be dismantled after it hardens itself to a considerable strength. For mold baking, the material containing thermoplastic carbon binder should be cooled to a sufficient strength before demoulding. After demolding, it should be rapidly heated to carbonize it before use. It does not contain binder materials that harden at room temperature. It is often sintered with a die after tamping. The sintering of the ramming material of the intermediate frequency furnace can be carried out before use, or it can be completed by heat treatment with a suitable thermal system during use.

At present, there are many manufacturers using intermediate frequency furnace charging materials in the market, which makes many people see business opportunities and have the courage to enter it. Any steel grade is suitable. In fact, it deviates from the ramming material itself. The intermediate frequency furnace ramming material itself is the maintenance of the furnace. And the coil. In order to play a role, the head must have high refractoriness, strong corrosion resistance, corrosion resistance, and good compactness. Only by grasping the root can a good ramming material be produced. Any other formula is not intact It does not move, it needs to be controlled sensitively according to the temperature of the tempered steel, the properties of the steel, and the size of the furnace. Steelmaking is not the same as ironmaking and coppermaking. Therefore, it is necessary to treat it differently and be down-to-earth. Only in this way can a kind of refractory be produced. Materials. The curves of the out-of-collar ovens are all different.