What is the knotting process of wear-resistant ramming material?

There are many processes in the whole process of wear-resistant ramming material, and knotting is some of the more important processes. And the process of knotting can also affect the service life of the furnace. What should we pay attention to in the process of knotting How can we ensure that the service life of the furnace is not affected?

1. The basic is of course the standardized operation process, but in addition, there are many precautions in the knotting process of the wear-resistant ramming material. For example, ensure the power supply and water supply before knotting The improvement of the system should also be prepared in advance by the operators on each project. Of course, it also includes that the operators are not allowed to carry any combustibles on the job site, of course, including mobile phones, keys and other items.

2. Sand adding in the process of wear-resistant ramming material is a relatively strict process. For example, sand must be added at one time, and should not be added in stages. Of course, when adding sand, make sure that the sand is spread on the bottom of the furnace. Do not pile it up in a pile, otherwise it will cause the particle size of the sand to separate.

3. When tying the knot, I have to operate it according to the method of shaking first and then vibrating. And pay attention to the method to ensure that the process of operation should be light and then heavy. And the joystick should be inserted to the bottom once, and every time When inserting the rod, shake it 8 to 10 times.

4. After the bottom of the furnace is knotted, make sure that it can be put into the dry pot stably. In this way, the shape can be standardized, and it will generally be a standard annular 3-corner ring. Of course, in the entire knotting process, it is necessary to There are many more processes to pay attention to, and each process cannot be ignored.